Benefits of AquaPruf 7400 Conveyor:

• ​Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10′ long consist of multiple sections which are bolted together.
• Bearings are mounted in cast stainless steel housing for maximum performance in washdown environments.
• Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
• The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning. 
• Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated cleaning solutions.
• The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
• Drive sprockets are located on a 1.5″ square stainless steel shaft without fasteners to provide optimum drive strength and cleanability
• Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
• Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5″ diameter transfer.
• The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
• Belt lifters (optional) raise the belt form the wear strips by simply pulling an external lever for fast access and effective cleaning.

Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.

When required Dorner can passivate conveyors or provide most materials in 316 or 316L stainless steel.